switch-it! - DIY ESP8266 IoT
switch-it!
The official app & game
Distributed by UptoPlay
SCREENSHOTS
DESCRIPTION
Use UptoPlay to play online the game switch-it! - DIY ESP8266 IoT.
What is switch-it! ?
switch-it! is a simple configurator, monitoring, and controller app for your D.I.Y ESP8266 IoT device. You can use switch-it! for real-time monitoring and controling for example relay and motion sensor through WebSocket and MQTT. All configuration can be done via the app, including Wi-Fi and MQTT setup, so there is no need to hardcode anything, at all.
Features
- One Time Binding , the app will store connected device locally, so you don't have to manually enter address of the ESP everytime you wan't to access it.
- 3 Device Registration, bind up to 3 ESP8266 device for free.
- MQTT, support control and monitoring through MQTT. (Currently we only support, and tested MQTT implementation with HiveMQ broker).
- OTA Firmware Update, update device firmware through webserver.
- Auto Discovery, with mDNS service, the app will automatically look for configured ESP within the same local network.
- No Coding Required, we have provided a ready to flash firmware binary file. All you need to do is to configure WiFi connection, and bind it with the app.
- State Persistance, the board will revert back to the state it is in before a restart, or power out.
- Pull to Refresh, for easy reconnection to all bonded ESP board.
- Board Reset, swipe card to unbind the ESP board, and reset it to Wi-Fi configuration mode.
Device List
- General I/O
- Motion Sensor
Setup Guide
Setup, wiring guide, and firmware can be found in our GitHub Repository, invoklab/switch-it GitHub Repository .
Got feedback? We'd love to hear it!
You can send us your feedback or any inquiries to
[email protected]
Enjoy with UptoPlay the online game switch-it! - DIY ESP8266 IoT.
ADDITIONAL INFORMATION
Developer: Invok Lab
Recent changes: In this release we are removing MQTT feature temporarily. We found that it is still unstable to be released, and plan to focus on maintaining only websocket functionality for now.
We are also removing store, and increase binding limit to 50 devices. Theoretically users can now bind up to 50 devices, however we have to rely on user feedback to confirm the stability of having this much device bonded to the app.
Page navigation: