A2N Kernel Control for Ace 2 play online

## Supports all Ace 2 Variants: ##
-- GT-I8160
-- GT-I8160P
-- GT-I8160L

Note: works only with A2N Kernel + Root.

## App Features ##

# Power
-- Charger Control
Adjustable Max input current in 100 mA steps. - Range: 100 - 1500 mA - Default: 800 mA.
This affects the time required for charging the battery.
Make sure that your USB charger supports min. 1.5 A output power at 5 V.

-- Battery Informations
Input current, temperature, voltage.

-- Battery Care
Stop charging at level 80 % to reduce battery aging.
Limit charging temperature. - Range: 30 - 45 C - Default 40 C.
This will throttle charger input current if needed.

-- Battery LED (BLN EOC)
Turn on the soft-key LED at 100 % battery level.

-- USB OTG
Enables output voltage to the USB-Port.

# Audio
-- Gain Control
-- Headphones: up to +12 dB total (analog + digital)
-- Earpiece: up to +8 dB
-- Microphone: up to +30 dB
-- LPA i.e. Low-Power-Audio on suspend - Undervolting up to -100 mV in 12.5 mV steps.

# Screen
-- Sweep2Wake aka S2W
Ability to turn the screen on with a swype.

# CPU/GPU
-- Overclock Control
Ability to use different CPU Freqs while the screen is OFF.
Undervolting up to -200 mV in 12.5 mV steps.
-- Governor Tuning
Ability to disable boost, for better battery life.
"up_threshold" - To adjust balance between performance and powersave.

# Performance Profiles
-- Power Save
-- Balanced (Kernel Default)
-- Performance (OC)
-- Performance Plus (Gaming / OC) (Adjustable CPU / GPU Freq)

# RAM
-- Memory Management
Swap / zRam* - LZ4 compressed swap block-device in RAM - Choice: 0 - 100 % of RAM size
Adjust Swappiness, page-cluster and read_ahead_kb.
-- FSB / DDR Overclock
200 MHz/800 MHz @ 250 MHz/1000 MHz for higher RAM I/O throughput.
Ability to drop caches / buffers, to free RAM.

* For multitasking, gaming, responsiveness and battery life.

# Network
-- Load kernel module for network file systems
SMB / CIFS
NFS v3, v4.
L2TP - used for VPN.
-- TCP Congestion - Choice: cubic, new reno, bic, westwood+ etc ...

# Misc
-- Torchlight Tuning
Adjust brightness - Range: 1 - 16 (to get brighter torch)
-- BLN LED Notification
Set LED blink ON / OFF delay for notifications.
-- Accelerometer Calibration
Ability to disable Android logging.

# Advanced Power Menu
Ability to reboot to recovery / download-mode
## END App Features ##

## FAQ ##
Q: Is this app 100 % safe ?
A: Yes.

Q: Will this app overheat the phone if I use highest settings ?
A: No, you can't do anything wrong. Your phone has hard- and software overheat protection.

Q: Will this app change anything if I just flash A2N Kernel and install and start this app ?
A: No, the app will set on startup several kernel settings, but those are same as kernel default. To improve speed or battery life you need to change settings in this app.

Q: Will this app restore my settings at next boot ?
A: Yes, after the app passes license check.

Q: How to revert all changes made by this app ?
A: Uninstall this app and reboot the phone.

## Requirements ##
Search for "A2N Kernel Ace 2 XDA", there is everything you need.
Note: this app need internet for license check.

## Privacy ##
-- In case the app crashes it will send only technical debug info to the server.
-- At no time will this app ask you or send any private data.

## CREDITS ##
-- World-gear-symbol by Freepik from www.flaticon.com - edited by ace2nutzer
-- 000webhost